With undeniable technical maturity recognized after many years’ experience, Eco-Tech Ceram offers sustainable, cost-effective solutions for recovering waste heat to decarbonize industry.

Tegulys

Tegulys, a tile and brick manufacturer in the Haute Corrèze region of France, needs heat to power its dryer and firing process. However, more than 50% of the heat consumed in the baking oven is lost. With the
Eco-Stock®
it’s possible to capture and store waste heat from the baking oven, so that it can be used at the right time in the dryer and pre-bake chamber.

Aware of the economic and environmental profitability of such a project, the Nouvelle Aquitaine region andADEME have subsidized part of the infrastructure. Our network of partners then enabled Tegulys to finance the rest of the infrastructure via a financial lease.

See the data sheet

“We are the first industrial site to have welcomed the Eco-stock® solution developed by the Eco-Tech Ceram company in 2019. The trust and support of the New Aquitaine Region were decisive in validating the merits of this solution and customizing it. Finally, we are doubly satisfied: the Eco-Stock® solution allows us to improve the energy efficiency of the firing process but also to increase our production capacity.”

-Nicolas Ducrot, CEO of Tegulys

It was mentioned in the press

wienerberger

As part of their commitment to decarbonization, Wienerberger, a giant in industrial bricks and tiles, has decided to form a partnership with Eco-Tech Ceram.

The Pontigny site (Yonne – Burgundy Franche Comté region) is equipped with a thermal accumulator, our
Eco-Stock®
to transform heat loss into sustainable solutions.

Our thermal accumulator recovers the heat from their ovens to send it back to the dryers. The result is a reduction in energy consumption at their tile factory of over 480 tonnes of CO2/year, equivalent to more than 3.5 million km per year for a normal car.

Commissioning is scheduled for the second half of 2023.

See the data sheet

With its Eco-Stock® solution, Eco-Tech Ceram will allow us to recover waste heat from the six Pontigny kilns and to use this waste heat in our dryers. This will allow us to avoid any gas consumption in the dryers and to save 480 tons of CO2 per year. ”

– Robert Lacroix, Director of Sustainable Development, Wienerberger France

It was mentioned in the press

ArcelorMittal

ArcelorMittal is one of the largest steel producers in the world and the Dunkirk site represents one of the largest production capacities in Western Europe. Wishing to play its part in the fight against climate change by reducing its CO2 emissions by 35% in Europe by 2030, the company is committed to numerous energy efficiency initiatives at its industrial sites in France.

Our prototype has shown the profitability of our solution for the recovery of waste heat for the drying of agglomeration sludge. This allows ArcelorMittal to avoid using fossil fuels to dry its sludge and to avoid paying the extra cost of transporting wet sludge.

See the data sheet

“The work we did with Eco-Tech Ceram allowed us to identify and prioritize several solutions for recovering waste heat: for drying sludge, for producing steam, hot water and electricity. Eco-Tech Ceram also provides a network of third-party financiers and financing solutions. The first Eco-Stock® was commissioned in April 2022 at the Dunkirk site. “

– Thierry Poirier, Head of Energy Department, ArcelorMittal France

It was mentioned in the press

Villeroy & Boch

Villeroy & Boch has chosen to surround itself with committed players in order to bring about a real environmental and energy transformation of its production facilities at Valence d’Agen. The manufacturer then prepared a comprehensive multi-year decarbonization program.

The technology we’ve implemented has significantly reduced gas consumption and CO2 emissions at the plant’s two biggest consumers. The company is aiming to save 8 GWh on its annual energy consumption, thus avoiding the emission of 1,400 tonnes of CO2 per year (global scope for the entire site).

See the data sheet

“The plant will thus reduce its gas consumption by 42% compared with 2021. Without this saving, the site would be threatened by rising gas prices.”

– Laurent Santarelli, Manager of the Valence d’Agen plant, Villeroy & Boch France

It was mentioned in the press

H2020 SME Instrument

The main objective of this project is to demonstrate the
Eco-Stock®
our solution for recovering waste heat by thermal storage, in a real-life environment on a European heavy industry production site. To this end, the Eco-Stock® is installed in real conditions on an industrial site: Villeroy & Boch in Valence d’Agen, the international ceramics giant. It is directly adapted to the specifications of the tunnel furnaces of the site.

The Valence d’Agen plant has embarked on a genuine environmental and energy transformation of its production facilities.

This solution solves one of the major challenges facing industry today: increasing energy efficiency while reducing CO2 emissions and saving money.

See the data sheet

“We produce ceramic products, a material that lasts over time thanks to a traditional know-how internationally recognized for its manufacturing quality. We had to quickly start our energy transition in order to make this noble material compatible with the ecological challenges to come. Manufacturing in France, in a sustainable way, in synergy with local actors, skills, and resources will make Villeroy & Boch a model of Social and Environmental Responsibility! “

– Laurent Santarelli, Manager of the Valence d’Agen plant, Villeroy & Boch France

It was mentioned in the press

Aubert & Duval

In 2018, Aubert & Duval, a giant in high-end metallurgy, established a decarbonization strategy.

The goal? Reduce their greenhouse gas (GHG) emissions by 45% in 2030 (123,000 tons of CO2 equivalent emissions). After five years, they needed to find other levers and turned to Eco-Tech Ceram.

The project? Hot fumes from the metallurgist’s furnaces will be directed to a heat exchanger. With it, hot air will be produced which will feed the burners. As a result, the manufacturer expects to reduce CO2 emissions from its gas furnaces by 20-25%.

See data sheet

“We have already reduced our emissions by 39%, but with the mitigation of the pandemic and the jolts in aviation, we expect to see some pretty significant upturns in activity. To meet our decarbonization trajectory, we need to go much further! That’s why we turned to Eco-Tech Ceram, a company that specializes in energy efficiency.”

– Frédéric Pidoux, Head of the Environment, Energy & Industrial Risks Department at Aubert & Duval France

It was mentioned in the press

Réalisation d'un diagnostic énergétique par un ingénieur d'Eco-Tech Ceram en vue de la valorisation des chaleurs fatales dans une usine d'Aubert & Duval.

All our references